Silicone Gel Roll
Wuhan Huawei Technology Co., Ltd
Wuhan Huawei Technology Co., Ltd. was founded in 2002. Its headquarters is located in Wuhan Yangtze River New City, a national strategic development base in China. It has always been committed to the medical and health industry. It is a high-tech enterprise integrating R&D, production, sales and service. After 20 years of market precipitation, it has formed a development layout of the entire industrial chain of research, production and sales, and built a number of product systems such as "new medical materials", "high-end functional dressings", "medical patches & plaster", covering Medical and health care, personal care, home care, raw material manufacturing and many other fields.
Product Categories
Latest Products
Company Advantage
Patented Technology
The patented WPU membrane uses biomimetic materials to overcome the challenges of wound care, advance the theory of moist healing and develop innovative dressing.
International Qualifications
Certified by FDA/CE/TGA/HSA and ISO management systems, with a global compliance network spanning over 170 countries/regions.
R&D Strength
A Class 10,000 cleanroom laboratory and a global R&D center where experts collaborate drive innovation in medical materials and care solutions across the chain.
Industrial Layout
A Class 10,000㎡ 100,000 GMP facility serves a world-class OEM base and integrates R&D, production and quality control processes.
|
Product Name |
Silicone Gel Roll |
|
Material |
Silicone,pu film |
|
specification |
4cm*150cm or OEM available |
|
Packing |
1 Roll/box,250boxs/carton |
|
Weight |
35g/bag, 9.5kg/carton |
|
Characteristic |
1. Silicone has self-adhesive properties, is non-toxic and non irritating, and has an extremely low allergy rate. |
Module Selection
|
Module |
Base |
Coating |
Back |
Length |
Width |
Color |
MOQ |
Pack |
|
1 |
NW/PE |
Silicone |
PET |
160"/508cm |
1.6"/4cm |
Tan/Beige/Blue |
900 Rollls |
Paper box |
|
2 |
NW/PE |
Silicone |
PET |
5.9"/150cm |
1.6"/4cm |
Tan/Beige/Blue |
5000 Pcs |
Plastic bag |
|
3 |
NW/PE |
Silicone |
PET |
29.5"/75cm |
1.6"/4cm |
Tan/Beige/Blue |
3000 Pcs |
Plastic bag |
|
Performance |
Indicators |
Inspection method |
|
Appearance |
Smooth, no wrinkles and cracking, no glue on back, free of foreign bodies, no peculiar smell; |
By visual inspection and feel inspection, the results shall comply with the provisions of 2.1. |
|
Size |
Conform to the provisions of Table 1, and the allowable error is ±5%; |
General or special measuring tools shall be used for inspection, and the results shall comply with the provisions of 2.2. |
|
Holding viscosity |
The top slide attached to the stainless steel plate should not exceed 2.5mm; |
The test shall be carried out according to the test method of Chapter B.2 in Appendix B of YY/T0148-2006, and the results shall conform to the provisions of 2.3. |
|
Peeling strength |
Average force required for each 1cm width tape should not be less than 1.0N; |
According to test method of Chapter B.3 in Appendix B of YY/T0148-2006, test results shall meet requirements of 2.4. |
|
Comfort/Extensibility |
Extensibility should not be ≧ 14N.cm-1, and permanent deformation should not be ≧ 5%; |
In accordance with the requirements of YY/T0471.4-2004 test, the results should meet the requirements of 2.5. |
|
Residual adhesive |
No residual adhesive material after placed at 37℃ for 30 minutes |
25mm*50mm is pasted on the corresponding fabric, placed in a 37℃ incubator, and removed after 30 |
|
Vapor permeability |
Vapor penetration should not be ≦ 500g.m-2 every 24 hours. |
According to the test method of Appendix C of YY/T0148-2006, the results should meet the requirements of 2.7. |
|
Water resistance |
Self-adhesive silicone tape should be water resistant. |
In accordance with the requirements of YY/T0471.3-2004 test, the results should meet the requirements of 2.8. |
Performance
Sticky: It should be able to withstand 50g of quality per 16cm2 without falling off;
The water vapor transmission amount is greater than 30g / (m2 × 24h);
The elongation at break of the product is not less than 200%;
pH value 6.0-8.0;
The heavy metal content is not more than 10 μg/mL.
Notice Of Silicone Wound Dressing
This product is the disposable , it is forbidden to reuse, if the pack is broken, do not use.
Please use within valid, read the instructions carefully before using.
Change the dressing when the back begin to discolor or deform.
Storage of silicone gel scar sheet: No corrosive gas, a cool, well ventilated, clean room and room temperature preservation.
Application
It can be cut into a size suitable for the size of the wound according to the needs of clinical use.
It does not adhere to the wound and reduces the pain when changing dressings.
Rehydrate the dry and necrotic tissue to promote autolytic debridement.
Maintain a moist environment and promote healing.
How To Use
Take an appropriate amount of gel and spread it evenly on the scar.
Rub it with your fingers for 3-5 minutes, until the skin or scar tissue is completely absorbed.
Apply 1-2 times each time, 2-3 times a day.
Certifications
FAQ
We're well-known as one of the leading silicone gel roll manufacturers and suppliers in China. Please feel free to wholesale customized silicone gel roll made in China here from our factory. Contact us for more details.
Hydrocolloid dressing with foam backing, Capsicum Rheumatism Porous Pain Relief Plaster, Cooling Gel Strip To Relief Fever